The EP4000 builds on the incredible legacy of our EP2500, which is one of the best-selling power amps in the industry. Our proprietary Accelerated Transient Response (ATR) Technology gives the EP4000 the massive power reserves needed for deep and impactful bass response, which translates into a more natural sound quality that will bring your audience to its feet – and keep them there! With an amazing 4,000-Watts of output power (2 x 2,000 Watts @ 2 Ohms; 2 x 1,400 Watts @ 4 Ohms; 4,000 Watts @ 4 Ohms in Bridge mode), the EP4000 is the perfect amplifier for medium-sized club gigs, mobile PA systems, church services or public spaces.

Remarkable Ease-of-Use
The über-simple front panel controls of these amps give you all of your sound’s vital signs at a glance. After flipping the Main switch, the Power LED will light when the amp is ready for action. Both channels have independent gain dials as well as Clip LEDs that indicate when the signal is distorted and you need to reduce the gain. There are also Signal LEDs that light up when a signal is present at the input.

Accelerated Transient Response Delivers the Knock-Out Punch
It takes huge pulses of energy (current and voltage) to propel a woofer cone fast enough to match a bass beat. That’s called Transient Response and it’s the holy grail of amp designers. By carefully selecting transistors with extremely high slew rates and optimizing other proprietary parts of our circuitry, the EP4000 reacts instantly to even the most demanding bass impulses. If the woofers in your PA system can keep up, your audience will hear a tighter, crisper, more natural sound.

We’ve Got Your Back
The rear panel of every EUROPOWER EP4000 sports an array of options to help you get the most out of your amp. The built-in Clip Limiter automatically senses when the amplifier is being driven into “clipping” and momentarily reduces the input level to avoid distortion. This all happens in mere micro-seconds, making it the ideal way to ensure perfect sound all the time.

Stage vibrations, mic thumps and wind noise can cause ultra-low frequency sounds, or infrasonics – and while technically inaudible, they can be a real drain on power resources. As a solution, the EP4000 features a defeatable Low Cut Filter that eliminates frequencies below either 50 or 30 Hz (depending on your PA system’s capabilities) – for better sonic performance, as well as the ultimate in loudspeaker protection. The rear panel also contains the Stereo or Bridge (mono) mode switches.

Rugged Reliability
There are lots of awesome features on the outside of the EP4000, but this amplifier’s beauty goes much more than just skin-deep. Inside you’ll find industry-leading components, such as world-class Toshiba/Fairchild power transistors, and a custom-designed, high-current toroidal transformer for ultra-high transient response and further reliability. Independent DC and thermal overload protection on each channel automatically protects both the amplifier and your speakers. The exhaust fan, visible on the back panel, is the final stage of an internal back-to-front cooling system that keeps the comfortably EP4000 within its normal operating range. Finally, an impact-resistant, all-steel 2U rack-mount chassis protects your investment from the rigors of the road.

The Legend Powers On
The EP4000 builds on our incredible legacy as one of the world’s premier power amplifier builders, and our proprietary Accelerated Transient Response (ATR) Technology ensures you will get all the power and punch – when you need it! With an amazing 4,000-Watts of output power, the EP4000 is the perfect amplifier for a wide range of the most-demanding audio applications. Try one today, and find out why the EUROPOWER EP4000 is admired by professionals every – not just for performance and durability, but also the astoundingly-affordable price tag.

Professional 4,000-Watt Stereo Power Amplifier with ATR (Accelerated Transient Response) Technology

The NX3000 power amplifier packs 3000 Watts (2 x 1500 Watts @ 2 Ohms; 2 x 900 Watts @ 4 Ohms; 3000 Watts into 4 Ohms bridge mode) into exceptionally lightweight (7.7 lbs / 3.5 kg) and rack-mountable packages.

Ultra-Lightweight 3000-Watt Class-D Power Amplifier with SmartSense Loudspeaker Impedance Compensation

Features

• Power levels matched to the most popular speakers used by entertainers
• Optimized for maximum real-world headroom into 4 ohm and 8 ohm speaker systems
• Inputs: XLR, 1/4-inch TRS and phono input connectors for compatibility with any source
• Outputs: Speakon® combo accepts, 1/4-inch (TS) plugs or Speakon 2-pole and 4-pole plugs (connects two poles only). Binding posts support all other speaker wiring systems
• Minimum depth chassis (10.1-inch / 257 mm) fits in compact, inexpensive effects racks
• Lightweight - GX3 and GX5 less than 26 lb (12.5 kg). GX7 only 15.5 lb (7 kg)*
• Detented gain controls for precise setting and matching of sensitivity
• GuardRail™ automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show
• Front panel LEDs monitor power, signal and clipping
• Subwoofer/satellite crossover built-in

* 230V 16.5 lb (7.5 kg)

Specifications

• Output power per channel
• 8 ohms / 1 kHz (both channels driven) 500 W
• 8 ohms / 1 kHz (single channel driven) 600 W
• 4 ohms / 1 kHz (both channels driven) 700 W
• 4 ohms / 1 kHz (single channel driven) 850 W
• Distortion (1 dB below rated power, 1 kHz) 8 ohms: less than 0.02%
• 4 ohms: less than 0.05%
• Signal to Noise (20 Hz - 20 kHz) 100 dB
• Input Sensitivity 1.2 V rms
• Voltage Gain 34.4 dB
• Output Circuitry 2-tier Class H
• Power Requirements (1/8 power, pink noise at 4 ohms, 120V) 6:00 AM
• Frequency Response 20 Hz–20 kHz, +0, -1 dB
• Dynamic Headroom (4 ohms) 2 dB
• Input Impedance Greater than 20 kΩ (balanced)
• Maximum Input Level +24 dBu (16 V rms)
• Input Connectors (each channel) 3-pin XLR and 1/4-inch TRS, balanced, parallel
• Phono, unbalanced
• Output Connectors (each channel) Speakon®, 1/4-inch, Binding posts
• Amplifier and Load Protection Short circuit, open circuit, thermal, RF protection
• Load protected against DC faults
• Front Panel Controls and Indicators Gain controls, 21 detents
• Red CLIP LEDs, proportional, 0.1% THD threshold
• Green SIGNAL LEDs, threshold 35 dB below clipping
• Blue POWER LED, AC on
• Rear Panel Controls Full Range / Crossover switch
• 100 Hz, 3rd order LP (sub), 2nd order HP (top)
• Product Dimensions (H×W×D) 89 × 483 × 257 mm
• 3.5 × 19 × 10.1 in
• Carton Dimensions (H×W×D) 610 × 380 × 153 mm
• 24 × 15 × 6 in
• Net Weight 12.6 kg / 28 lb
• Shipping Weight 14.5 kg / 32 lb

IPR2™ 7500 Lightweight Power Amp
IPR2 power amplifiers, designed for years of reliable, flawless operation under rigorous use. The groundbreaking IPR2 series utilizes an advanced design that allows Peavey engineers to dramatically reduce weight while increasing output power, reliability and thermal efficiency. IPR2 Series amplifiers are designed with a resonant switch-mode power supply and a high-speed class D topology that yields the highest audio resolution and efficiency available. This revolutionary amplifier offers the sonic superiority and unsurpassed reliability for which Peavey is famous, in an extremely efficient and lightweight design. Advanced technology and extensive protection circuitry allow operation with greater efficiency into difficult loads and power conditions. The DDT (Distortion Detection Technique) circuitry ensures trouble-free operation into loads as low as 2 ohms. DDT protects drivers and ensures that sonic integrity is maintained, even in extreme overload conditions. The IPR2's high-efficiency design allows the amplifier to operate at very low temperatures, and does not require massive heat sinks to cool.

• 4750 watts 2 Channels @ 2 Ohms
• 2800 watts 2 Channels @ 4 Ohms
• 1550 watts 2 Channels @ 8 Ohms
• 3750W RMS x 2 at 2 ohms
• 2022W RMS x 2 at 4 ohms
• 1250W RMS x 2 at 8 ohms
• 2 channel independent, fourth-order Linkwitz-Riley crossovers
• DDT protection
• Revolutionary IPR class D topology
• Detented input controls
• Combination XLR 1/4" inputs
• 4 pole twist lock output connectors
• Ultra-light weight
• Individual signal pass 1/4" jacks on each channel
• LED illuminated
• Standby, LED power present indication
• Weight Unpacked: 14.57 lb(6.61 kg)
• Weight Packed: 18.39 lb(8.34 kg)
• Width Packed: 21"(53.34 cm)
• Height Packed: 21.2"(53.848 cm)
• Depth Packed: 6"(15.24 cm)

• Independent user-defeatable clip limiters reduce distortion
• Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom
• The 4000-watt RMX4050a operates on a standard 15 amp plug (120 V)
• Both the RMX4050a and the RMX5050a feature a dual mono, high-current power supply for increased reliability and performance
• The RMX4050a's particularly exceptional combination of cooling capacity and electrical efficiency provides robust thermal performance suitable for high continuous power in 2-ohm stereo or 4-ohm bridged applications.
• Balanced 1/4-inch (6.3 mm) TRS, XLR, and barrier strip inputs
• Touch-proof binding post and Neutrik Speakon® outputs
• Front mounted gain controls for easy access
• Signal and clip LED indicators for monitoring performance
• Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers
• 3-year warranty plus optional 3-year extended service contract
  

Power levels matched to the most popular speakers. Inputs: XLR, 1/4" TRS and phono. Outputs: Speakon® combo and binding posts.

Features

• Power levels matched to the most popular speakers used by entertainers
• Optimized for maximum real-world headroom into 4- and 8-ohm speaker systems
• Inputs: XLR, 1/4-inch TRS and phono input connectors for compatibility with any source
• Outputs: Speakon® combo accepts 1/4-inch (TS) plugs or Speakon 2- and 4-pole plugs (connects 2 poles only). Binding posts support all other speaker wiring systems
• Minimum depth chassis (10.1-inch / 257 mm) fits in compact, inexpensive effects racks
• Lightweight - GX3 and GX5 less than 26 lb (12.5 kg). GX7 only 15.5 lb (7 kg)*
• Detented gain controls for precise setting and matching of sensitivity
• GuardRail™ automatically protects the amplifier and loudspeakers from damage due to temperature rise or overdrive without shutting down the show
• Front panel LEDs monitor power, signal, and clipping
• Subwoofer/satellite crossover built-in

* 230V 16.5 lb (7.5 kg)

Specifications

• Output power per channel
• 8 ohms / 1 kHz (both channels driven) 300 W
• 8 ohms / 1 kHz (single channel driven) 350 W
• 4 ohms / 1 kHz (both channels driven) 425 W
• 4 ohms / 1 kHz (single channel driven) 500 W
• Distortion (1 dB below rated power, 1 kHz) 8 ohms: less than 0.02%
• 4 ohms: less than 0.05%
• Signal to Noise (20 Hz - 20 kHz) 100 dB
• Input Sensitivity 1.2 V rms
• Voltage Gain 32.2 dB
• Output Circuitry Class B
• Power Requirements (1/8 power, pink noise at 4 ohms, 120V) 6.3 A
• Frequency Response 20 Hz–20 kHz, +0, -1 dB
• Dynamic Headroom (4 ohms) 2 dB
• Input Impedance Greater than 20 kΩ (balanced)
• Maximum Input Level +24 dBu (16 V rms)
• Input Connectors (each channel) 3-pin XLR and 1/4-inch TRS, balanced, parallel Phono, unbalanced
• Output Connectors (each channel) Speakon®, 1/4-inch, Binding posts
• Amplifier and Load Protection Short circuit, open circuit, thermal, RF protection
• Load protected against DC faults
• Front Panel Controls and Indicators Gain controls, 21 detents
• Red CLIP LEDs, proportional, 0.1% THD threshold
• Green SIGNAL LEDs, threshold 35 dB below clipping
• Blue POWER LED, AC on
• Rear Panel Controls Full Range / Crossover switch
• 100 Hz, 3rd order LP (sub), 2nd order HP (top)
• Product Dimensions (H×W×D) 89 × 483 × 257 mm
• 3.5 × 19 × 10.1 in
• Carton Dimensions (H×W×D) 610 × 380 × 153 mm
• 24 × 15 × 6 in
• Net Weight 12.1 kg / 27 lb
• Shipping Weight 13.2 kg / 29.1 lb

El Hohner 1303-RED presenta un mecanismo mejorado para la respuesta táctil de las teclas macizas, voces afinadas a tremolo y una construcción resonante. Produce un sonido completamente vibrante ideal para principiantes y estudiantes.

• 26 keys, range G-G
• 12 bass buttons
• 2 sets of reeds
• Red pearl colour
• Includes gig bag and straps
• Para ver la garantía del producto, da click aquí.

El Hohner 1304-RED Acordeón de Estudiante Hohnica es el comienzo perfecto para el acordeonista principiante en tu vida. Hohner ha trabajado intensamente para mejorar muchas funciones en esta nueva versión de la Hohnica. Estas funciones incluye un mecanismo mejorado para una respuesta de las teclas táctil y maciza, voces afinadas a tremolo, una construcción resonante, y un sonido completamente vibrante. Tiene 48 botones de bajos con 26 teclas y un rango de B-C. También viene con dos sets de voces, afinación a trémolo, y tres registros de agudos. Si eres un estudiante principiante de acordeón o conoces a alguien, este es el regalo perfecto.

• 48 Bass; Red body with 26 Keys
• Range B-C
• 2 Sets of Reeds
• Tremolo Tuning
• Three treble registers with one repeat
• Para ver la garantía del producto, da click aquí.

El Hohner 1305-RED Acordeón de Estudiante Hohnica es el comienzo perfecto para el acordeonista principiante en tu vida. Hohner ha trabajado intensamente para mejorar muchas funciones en esta nueva versión de la Hohnica. Estas funciones incluye un mecanismo mejorado para una respuesta de las teclas táctil y maciza, voces afinadas a tremolo, una construcción resonante, y un sonido completamente vibrante. Tiene 72 botones de bajos con 34 teclas y 5 registros con un rango de G-E. Esta construcción ofrece una proyección mejorada, calidad de tono, y durabilidad. Además, los 72 bajos permiten un rango profesional de voces de bajos.

También viene con dos sets de voces, afinación a trémolo, y cinco registros de agudos. Si eres un estudiante principiante de acordeón o conoces a alguien, este es el regalo perfecto.

• 72 Bass; Red body with 34 keys
• Range G-E
• 2 Sets of Reeds
• Tremolo Tuning
• Five treble registers with one repeat
• Para ver la garantía del producto, da click aquí.

Ultra-Lightweight 6000-Watt 4-Channel Class-D Power Amplifier with SmartSense Loudspeaker Impedance Compensation