iRig Pro I/O Professional Audio/MIDI Interface

IK MultimediaSKU: IRIG PRO I/O

Precio:
Precio de venta$149.99 USD

Descripción

Now record with any of your gear on the go, and monitor in real time with any compatible device! That’s iRig Pro I/O, the ultra-compact professional quality audio and MIDI in/out for your mobile recording life!

iRig Pro I/O is the next generation of the iRig Pro — the first mobile interface for connecting all of your studio gear to your iPhone, iPad, Mac, PC or Android device to play and record on the go.

iRig Pro I/O is a pocket-sized full-featured audio and MIDI interface that gives you 24-bit/96kHz recording studio quality sound everywhere you go with a few additional essential features for mobile recording.

All your gear, all the time

iRig Pro I/O is designed for all your gear — studio mics, vocal mics, guitars, basses, keyboards, sound modules, MIDI Controllers — you name it. At its core, iRig Pro I/O features 24-bit A/D and D/A converters, and a 96kHz sample rate for professional quality audio on the go. When using a studio microphone, iRig Pro I/O can supply 48V of phantom power to the XLR jack for your active condensers. Plus, you can dial in the perfect and precise amount of gain with the new marked gain control knob. Recalling your gain settings for your mics and instruments has never been easier.

iRig Pro I/O also features a 1/4" Hi-Z input that easily handles passive and active pickup configurations. Again, the numbered gain wheel lets you dial in the perfect amount of input signal for your recordings and recall them with ease.

We’ve also added a MIDI Out jack (and included the cables for you) that lets you easily chain and control your outboard MIDI gear.

Use your studio mics anywhere

With iRig Pro I/O, you can use any microphone you own because it sports onboard 48V switchable phantom power for your condensers. iRig Pro I/O features a combination Neutrik XLR and 1/4" input jack, and an input gain control with a calibrated oversize knob for precise gain setting and recall. Now setup with your studio gear is easier than ever before. Simply plug in, adjust your input gain and hit record.

Listen Up

One of the major advancements of iRig Pro I/O is the addition of an 1/8" stereo headphone output with preamp and level control. Now you can play, record and monitor with all of your devices — even the most recent iPhones and iPads — with the depth and headroom you’d get only from a traditional recording studio setup.

Microphone Input

  • Microphone Input: balanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
  • Microphone Input Level: from 6 mVpp to 1.4 Vpp
  • Microphone Input Impedance: 3.2 kOhms
  • Gain Range: 40 dB
  • Phantom Power: +48V ± 4V
  • Frequency Response: 20 Hz - 20 kHz +/-1.5dB
  • Input Noise: -103 dB(A), -97 dB RMS

Instrument Input

  • Instrument Input: unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground
  • Instrument Input Level: from 30 mVpp to 6.9 Vpp
  • Instrument Input Impedance: 1 MOhms
  • Gain Range: 27 dB
  • Frequency Response: 20 Hz - 20 kHz +/-1.5dB
  • Input Noise: -103 dB(A), -97 dB RMS

Stereo Headphone Output

  • Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
  • Headphone Level Control numbered thumbwheel
  • Headphone Level Power 100mW into 50 Ohms

Stereo Headphone Output

  • Connector: 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground
  • Headphone Level Power 100mW into 50 Ohms

MIDI Input/Output

  • Connector: 2x2.5mm TS Jack

Other Input/Output

  • DC barrel: 1x DC barrel. For power and device charging.
  • Device Connector: mini-DIN

Common

  • Conversion: 24-bit A/D, 24-bit D/A
  • Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz
  • Power:
    • USB bus powered when used with a computer
    • Battery powered (2xAA included) when used with an iOS device
    • DC power supply (not included, iRig PSU 3A sold separately)*

Package includes

  • iRig Pro I/O universal Audio-MIDI interface
  • Lightning to Mini-DIN connection cable with charging features (60cm/23.62")
  • USB-A to Mini-DIN connection cable (60cm/23.62")
  • 5mm TRS male to MIDI female adapter (10cm / 3.9")
  • 2 x 1.5V AA Battery
  • Velcro strip

Dimensions

  • Size: 43mm/1.69" x 127mm/5" x 37mm/1.46"
  • Weight: ~120g/4.23oz (batteries excluded)

You may also like

Recently viewed